How to setup my ADSL connection?

Physical layout

 

Before you can proceed with the installation of the client software, you must set up the connection to the modem, phone line and cables. Shown below are the steps to set up this connection.

STEP 1: Connecting the UTP Ethernet Cable

Connect one end of the Ethernet cable to your modem Ethernet jack and the other end to the Ethernet card on your pc.

STEP 2: Connecting the telephone cable (RJ11)

Connect one end of the telephone cable (RJ11) to the line jack of your splitter and the other end to the telephone wall socket.

 STEP 3: Connecting to the telephone set

Connect one end of the telephone cable (you need 1 more telephone cable) to the TEL jack of your modem and the other end to the splitter. Connect the splitter to the telephone by using another telephone cable (RJ11).

 STEP 4: Connecting to a Power source

Power on your ADSL modem by using the power adapter provided.

STEP 5: Verifying the Connection

You should see POWER LED, DSL/LINK LED, DATA LED and ETHERNET LED light up when the ADSL modem is switched ON.

What does that word mean?

<Previous - Home - Next>
__________________________________________________________________